Green-T Basic Professional Turntable round
Height fully adjustable from 43 to 60 cm.
Diameter of the turntable: 58 cm
Lifting capacity: up to 200 kg
Weight: 15 kg
Functional metal base with adjustable support on 5 points and lever hydraulic pump with pedal control:
- Height adjustment: pumps the pedal
- Determine: Pedal to the top
- Lowering: Pedal press down
Metal base with 5 star support and hydraulic pump lift by foot control. Adjustable height of the bearing surface (minimum 17 in. (43 cm) – maximum 24 in. (60 cm) ) The swing brake of the table can be disconnected with a simple movement of the pedal. 5 removable eye screws, located in the lower part of the work plan, allow a solid anchor of the bonsai to the table. Mounting complete with steel bolts. All components and materials used are guaranteed weatherproof.
€345.00
incl. VAT plus shipping
Green-T Basic Professional Turntable square
Height fully adjustable from 43 to 60 cm.
Diameter of the turntable: 58 x 58 cm
Lifting capacity: up to 200 kg
Weight: ca. 16 kg
- Height adjustment: Pump the pedal
- Lock it: Pedal up
- Lowering: Press pedal downwards
Functional metal base with adjustable support on 5 points and lever hydraulic pump with pedal control:
- Height adjustment: pumps the pedal
- Determine: Pedal to the top
- Lowering: Pedal press down
Metal base with 5 star support and hydraulic pump lift by foot control. Adjustable height of the bearing surface (minimum 17 in. (43 cm) – maximum 24 in. (60 cm) ) The swing brake of the table can be disconnected with a simple movement of the pedal. 5 removable eye screws, located in the lower part of the work plan, allow a solid anchor of the bonsai to the table. Mounting complete with steel bolts. All components and materials used are guaranteed weatherproof.
€345.00
incl. VAT plus shipping
Green-T Mini with suction cup - approx. 20 x 20 x 19 cm
External dimensions:
20 x 20 x 19 cm
Can be used with every table. Thanks to the rotating system with three axes smoothly adjustable in all directions! Enables 360 degrees of horizontal rotation and 90 degrees of vertical tilt.
€145.00
incl. VAT plus shipping
Green-T Mini with vise - approx. 20 x 20 x 32 cm
Can be used with every table. Thanks to the rotating system with three axes smoothly adjustable in all directions! Enables 360 degrees of horizontal rotation and 90 degrees of vertical tilt.
€135.00
incl. VAT plus shipping
Green-T Plus Professional Turntable round
Height fully adjustable from 47 to 82 cm.
Diameter of the turntable: 58 cm
Lifting capacity: up to 200 kg
Weight: ca. 16 kg
- Height adjustment: Pump the pedal
- Lock it: Pedal up
- Lowering: Press pedal downwards
Functional metal base with adjustable support on 5 points and lever hydraulic pump with pedal control:
- Height adjustment: pumps the pedal
- Determine: Pedal to the top
- Lowering: Pedal press down
Metal base with 5 star support and hydraulic pump lift by foot control. Adjustable height of the bearing surface. The swing brake of the table can be disconnected with a simple movement of the pedal. 5 removable eye screws, located in the lower part of the work plan, allow a solid anchor of the bonsai to the table. Mounting complete with steel bolts. All components and materials used are guaranteed weatherproof.
€465.00
incl. VAT plus shipping
Green-T Plus Professional Turntable square
Height fully adjustable from 47 to 82 cm.
Diameter of the turntable: 58 x 58 cm
Lifting capacity: up to 200 kg
Weight: ca. 17 kg
- Height adjustment: Pump the pedal
- Lock it: Pedal up
- Lowering: Press pedal downwards
Functional metal base with adjustable support on 5 points and lever hydraulic pump with pedal control:
- Height adjustment: pumps the pedal
- Determine: Pedal to the top
- Lowering: Press down pedal
Metal base with 5 star support and hydraulic pump lift by foot control. Adjustable height of the bearing surface. The swing brake of the table can be disconnected with a simple movement of the pedal. 5 removable eye screws, located in the lower part of the work plan, allow a solid anchor of the bonsai to the table. Mounting complete with steel bolts. All components and materials used are guaranteed weatherproof.
€465.00
incl. VAT plus shipping
Scissor lift working table / hydraulic
This hydraulic lift working table is oustandingly suited to work on your bonsai trees.
Thanks to its powerful hydraulic lift (Capacity: up to 135 kg), you may work on your tree at the right height which is continuously adjustable by a foot pedal.
Minimum height: 35 cm
Maximum height: 87 cm
Size of the working area: 35 x 40 cm
Weight: 30 kg
€139.00
incl. VAT plus shipping
Shohin Table - approx. 18 x 11,5 x 5 cm
External dimensions:
18 x 11,5 x 5 cm
Ideally suited to present small trees. The solid tables - Made in Japan - are made of hard plastic and are designed for year-round outdoor use. They are completely weather- and UV-resistant.
A nice detail is the four prepared holes, through which a fine wire or a tape can be pulled. This means that the plant can be fixed in such a way that it does not fall off in the event of a storm or too strong a pouring stream.
€36.00
incl. VAT plus shipping
Table - approx. 20 x 15 x 4,5 cm
External dimensions:
20 x 15 x 4,5 cm
Rectangular bonsai table
Stone cast feet, slate top
Slate top can be treated with clinker oil and then appears almost black (see photo)
€23.00
incl. VAT plus shipping
Table - approx. 30 x 21 x 4 cm
External dimensions:
30 x 21 x 4 cm
Rectangular bonsai table
Stone cast feet, slate top
Slate top can be treated with clinker oil and then appears almost black (see photo)
€29.00
incl. VAT plus shipping
Table - approx. 30 x 30 x 5 cm
External dimensions:
30 x 30 x 5 cm
Square Bonsai Table
Stone cast feet, marble top
€33.00
incl. VAT plus shipping
Table - approx. 40 x 30 x 5,5 cm
External dimensions:
40 x 30 x 5,5 cm
Rectangular bonsai table
Stone cast feet, slate top
Slate top can be treated with clinker oil and then appears almost black (see photo)
€45.00
incl. VAT plus shipping
Table - approx. 60 x 40 x 5,5 cm
External dimensions:
60 x 40 x 5,5 cm
Rectangular bonsai table
Stone cast feet, slate top
Slate top can be treated with clinker oil and then appears almost black (see photo)
€59.00
incl. VAT plus shipping
Table, rect. - approx. 25 x 18 x 6 cm
External dimensions:
25 x 18 x 6 cm
Footprint: 24 x 17 cm
Presentation table with tray and wick.
Material: Plastic.
Through the wick, your plant will uniformly supplied with water, even if you should not be present.
Der water tank slowly supplied water to the bonsai, allowing you to only water the plant every 10 to 30 days, depending on the species and the size of the pot.
Important: Even if watering is not necessary, check the water level at least one a week.
The use is recommended:
- for interior species like Ficus, Zelkova, Ligustrum etc., to satisfy the high water requirements espexially during spring and summer.
- For all other interior and exterior species, for holidays, weekends away or to complement the usual irrigation method.
€19.00
incl. VAT plus shipping
Table, rect. - approx. 32 x 22 x 6 cm
External dimensions:
32 x 22 x 6 cm
High quality bonsait table, made from marble. Made in Taiwan.
Footprint: approx. 28.5 x 19 cm
€148.00
incl. VAT plus shipping
Table, round - approx. 54 x 50 x 6 cm
External dimensions:
54 x 50 x 6 cm
This sturdy table is a rotating worktable as well as a display table. It's top is made of wood Steinguß optics, and the rotation mechanism is metal.
Weight: 10 kg
Capacity: 150 kg
€70.00
incl. VAT plus shipping
Table, square - approx. 47 x 39 x 5 cm
External dimensions:
47 x 39 x 5 cm
This sturdy table is a rotating worktable as well as a display table. It's top is made of wood Steinguß optics, and the rotation mechanism is metal.
Weight: 10 kg
Capacity: 150 kg
€70.00
incl. VAT plus shipping
Turntable - 40 x 40 cm
This is a top quality Japanese turntable for working on bonsai trees or plants. It has a large surface area of 30cm and makes working on your trees a lot easier. Made from high density resin, water resisant.
Diameter: ca. 40 x 40 cm
Made in Japan
€88.00
incl. VAT plus shipping
Turntable - 48 cm
This is a top quality Japanese turntable for working on bonsai trees or plants. It has a large surface area of 30cm and makes working on your trees a lot easier. Made from high density resin, water resisant.
48 cm
Made in Japan
€108.00
incl. VAT plus shipping
Turntable - approx. 20 x 15 x 3 cm
Rectangular Bonsai Table
Slate top
Slate top can be treated with clinker oil and then appears almost black (see photo)
€27.00
incl. VAT plus shipping
Turntable - approx. 30 x 19 x 3 cm
Rectangular Bonsai Table
Slate top
Slate top can be treated with clinker oil and then appears almost black (see photo)
€29.00
incl. VAT plus shipping
Turntable - approx. 40 x 30 x 3 cm
Rectangular Bonsai Table
Slate top
Slate top can be treated with clinker oil and then appears almost black (see photo)
€45.00
incl. VAT plus shipping
Turntable - approx. 60 x 40 x 3 cm
Rectangular Bonsai Table
Slate top
Slate top can be treated with clinker oil and then appears almost black (see photo)
€59.00
incl. VAT plus shipping
Turntable -30 x 40 cm
This is a top quality Japanese turntable for working on bonsai trees or plants. It has a large surface area of 30cm and makes working on your trees a lot easier. Made from high density resin, water resisant.
Diameter: ca. 30 x 40 cm
Made in Japan
€68.00
incl. VAT plus shipping
Turntable (plastic) - approx. 25 x 25 x 1,5 cm
Turntable made of plastic, to facilitate the work on your bonsai. Bears loads up to 10 kg.
€4.90
incl. VAT plus shipping
Work turntable (plastic) - approx. 30 x 30 x 5 cm
Very sturdy working turntable made of plastic, to make it easier to work on your bonsai.
€58.00
incl. VAT plus shipping